Icon: Lucide — ISC license (lucide.dev)
Free filet crochet pattern
Cuboid
By StitchingLab ·
This 50×50 chart finishes at roughly 13×13 inches in size-10 thread filet mesh, using 2 colors — a clean two-color project — a good first counted chart. As filet crochet the solid blocks sit on open mesh — curtain panels and table runners are the classic use. The grid, materials estimate, and written row-by-row instructions below are all free; open the chart in the editor to resize it or swap the palette to yarns you already own.
- Stitch type
- Filet crochet
- Grid
- 50 × 50
- Colors
- 2
Make it fit your project
This chart is 50×50 stitches — about 13×13″ in size-10 thread filet mesh. Pick a project and the motif rescales onto the right canvas (centered, never stretched), ready to fine-tune in the editor.
Chart
Share this pattern
Pin the chart for later, send it to a stitching friend, or download it for your pattern binder. Sharing is what keeps free patterns free.
Materials
626g total · 2 colors
- Buy on Amazon →
Patons · Classic Wool · Dark Green Heather
705 stitches · ~177g · 2 skeins
- Buy on Amazon →
Bernat · Super Value · White
1,795 stitches · ~449g · 3 skeins
Project kit
Gear this chart actually calls for
- Buy on Amazon →
Clover Amour Crochet Hook Set
Comfort-grip hooks in every size a chart can call for — one set covers the whole CYC weight range. — 5.5-6.5 mm (I-9 to K-10½)
- Buy on Amazon →
Tapestry Needles
Blunt-tip needles for weaving in the ends every color change leaves behind.
- Buy on Amazon →
Locking Stitch Markers
Mark pattern repeats, color-section starts, and the first stitch of the round so a miscount never survives a row.
- Buy on Amazon →
Sharp Yarn Snips
Small, sharp snips cut yarn clean at every color change — cleaner joins and easier weaving-in than scissors.
Project reality check
intermediate- Strands at once
- 9
- Color changes
- 226
- Ends · intarsia
- 10
- Ends · tapestry
- 4
- Up to 9 strands will be active in a single row — wind one bobbin per strand before you start to avoid tangles.
Written instructions
- spOpen mesh
- blBlock
Before you start
- Open mesh (sp) = dc, ch 2, skip 2; block (bl) = 3 dc plus the shared boundary dc — a row of n cells always totals 3n + 1 dc.
- Foundation: ch 3x(cells) + 3 if Row 1 starts with a block (turning ch-3 counts as first dc), or + 5 if it starts with a space (first dc in 8th ch from hook).
- Turn with ch 3 (counts as dc) before a block, ch 5 (counts as dc + ch 2) before a space.
- 1 RS50 sp
- 2 WS50 sp
- 3 RS28 sp3 bl19 sp
- 4 WS17 sp8 bl25 sp
- 5 RS24 sp10 bl16 sp
- 6 WS14 sp14 bl22 sp
- 7 RS21 sp16 bl13 sp
- 8 WS11 sp7 bl1 sp4 bl1 sp7 bl19 sp
- 9 RS17 sp7 bl3 sp4 bl2 sp7 bl10 sp
- 10 WS8 sp7 bl4 sp4 bl4 sp7 bl16 sp
- 11 RS14 sp7 bl6 sp4 bl5 sp7 bl7 sp
- 12 WS5 sp7 bl7 sp4 bl8 sp7 bl12 sp
- 13 RS11 sp7 bl9 sp4 bl8 sp7 bl4 sp
- 14 WS3 sp6 bl10 sp4 bl11 sp7 bl9 sp
- 15 RS8 sp7 bl12 sp4 bl11 sp5 bl3 sp
- 16 WS2 sp4 bl13 sp4 bl14 sp7 bl6 sp
- 17 RS4 sp7 bl16 sp4 bl13 sp4 bl2 sp
- 18 WS2 sp4 bl13 sp4 bl17 sp6 bl4 sp
- 19 RS3 sp5 bl19 sp4 bl13 sp4 bl2 sp
- 20 WS2 sp4 bl13 sp4 bl20 sp4 bl3 sp
- 21 RS2 sp4 bl20 sp6 bl12 sp4 bl2 sp
- 22 WS2 sp4 bl10 sp10 bl18 sp4 bl2 sp
- 23 RS2 sp4 bl17 sp12 bl9 sp4 bl2 sp
- 24 WS2 sp4 bl7 sp7 bl2 sp7 bl15 sp4 bl2 sp
Show all 50 rows
- 25 RS2 sp4 bl13 sp8 bl4 sp7 bl6 sp4 bl2 sp
- 26 WS2 sp4 bl4 sp7 bl8 sp8 bl11 sp4 bl2 sp
- 27 RS2 sp4 bl10 sp7 bl12 sp7 bl2 sp4 bl2 sp
- 28 WS2 sp4 bl1 sp7 bl15 sp7 bl8 sp4 bl2 sp
- 29 RS2 sp4 bl6 sp8 bl18 sp10 bl2 sp
- 30 WS2 sp8 bl22 sp7 bl5 sp4 bl2 sp
- 31 RS2 sp4 bl3 sp7 bl25 sp6 bl3 sp
- 32 WS3 sp5 bl27 sp8 bl1 sp4 bl2 sp
- 33 RS2 sp11 bl27 sp7 bl3 sp
- 34 WS4 sp7 bl28 sp9 bl2 sp
- 35 RS2 sp7 bl28 sp7 bl6 sp
- 36 WS8 sp7 bl27 sp5 bl3 sp
- 37 RS3 sp6 bl25 sp7 bl9 sp
- 38 WS11 sp7 bl21 sp7 bl4 sp
- 39 RS5 sp7 bl19 sp7 bl12 sp
- 40 WS14 sp7 bl15 sp7 bl7 sp
- 41 RS8 sp7 bl12 sp7 bl16 sp
- 42 WS17 sp7 bl9 sp7 bl10 sp
- 43 RS11 sp7 bl6 sp7 bl19 sp
- 44 WS21 sp7 bl2 sp7 bl13 sp
- 45 RS14 sp14 bl22 sp
- 46 WS24 sp10 bl16 sp
- 47 RS17 sp8 bl25 sp
- 48 WS28 sp2 bl20 sp
- 49 RS50 sp
- 50 WS50 sp
Work the pattern · row tracker
Row tracker
Row 1 of 50 - 2% done · tap the chart to pin the exact stitch you’re on
Row 1 (RS) ← 50 sp
Progress saves on this device and in the link above — down to the exact stitch when you’ve pinned one. Bookmark the link, or paste it into your Ravelry project notes to pick up precisely where you stopped, on any device.
Pattern code · SLPN v1
A canonical, lossless representation of this pattern. Paste it into any StitchingLab converter to reload, or share it as a single line of text.
SLPN/1/F/50x50/2:3F5D4F,F8F8F8/B:_____________________z_______gH______wA______wAD_____4DAf____4D8B____4D_gP___8B_-A___8B__wH__8B___Af_-A___4D_-A____gf_Af___8H_Af___-A_Af___-APgP___-AD4P___-AQ-B____AcPAP___AfDwA___APw8ID__gP8PDAf_gP_Dw8B_gH_w8PwHgH_8PD-AwH__Dw_4AH__w8P_AD__8PD_8D___Dw__h___h8P_4f__wfD_-H__wPw__h__4D8P_4f_4D_g_-H_4D_4H_h_8B__Af4f8B__4D-H-A___gPh-A___8B4eA____wGHAf___-AhAf____4AAf_____AAP_____8AP______gH______-P____________________8A/PA-CW-DG:0,BN-SV-WH:1
content_hash · 983e84622f94…
Related · free crochet patterns
