Icon: Lucide — ISC license (lucide.dev)
Free filet crochet pattern
Align Horizontal Space Around
By StitchingLab ·
This 50×50 chart finishes at roughly 13×13 inches in size-10 thread filet mesh, using 2 colors — a clean two-color project — a good first counted chart. Worked in filet, the motif reads through the open mesh — ideal for café curtains and linens. The grid, materials estimate, and written row-by-row instructions below are all free; open the chart in the editor to resize it or swap the palette to yarns you already own.
- Stitch type
- Filet crochet
- Grid
- 50 × 50
- Colors
- 2
Make it fit your project
This chart is 50×50 stitches — about 13×13″ in size-10 thread filet mesh. Pick a project and the motif rescales onto the right canvas (centered, never stretched), ready to fine-tune in the editor.
Chart
Share this pattern
Pin the chart for later, send it to a stitching friend, or download it for your pattern binder. Sharing is what keeps free patterns free.
Materials
625g total · 2 colors
- Buy on Amazon →
Caron · Simply Soft · Ocean
488 stitches · ~122g · 1 skein
- Buy on Amazon →
Bernat · Super Value · White
2,012 stitches · ~503g · 3 skeins
Project kit
Gear this chart actually calls for
- Buy on Amazon →
Clover Amour Crochet Hook Set
Comfort-grip hooks in every size a chart can call for — one set covers the whole CYC weight range. — 5.5-6.5 mm (I-9 to K-10½)
- Buy on Amazon →
Tapestry Needles
Blunt-tip needles for weaving in the ends every color change leaves behind.
- Buy on Amazon →
Locking Stitch Markers
Mark pattern repeats, color-section starts, and the first stitch of the round so a miscount never survives a row.
- Buy on Amazon →
Sharp Yarn Snips
Small, sharp snips cut yarn clean at every color change — cleaner joins and easier weaving-in than scissors.
Project reality check
intermediate- Strands at once
- 9
- Color changes
- 268
- Ends · intarsia
- 10
- Ends · tapestry
- 4
- Up to 9 strands will be active in a single row — wind one bobbin per strand before you start to avoid tangles.
Written instructions
- spOpen mesh
- blBlock
Before you start
- Open mesh (sp) = dc, ch 2, skip 2; block (bl) = 3 dc plus the shared boundary dc — a row of n cells always totals 3n + 1 dc.
- Foundation: ch 3x(cells) + 3 if Row 1 starts with a block (turning ch-3 counts as first dc), or + 5 if it starts with a space (first dc in 8th ch from hook).
- Turn with ch 3 (counts as dc) before a block, ch 5 (counts as dc + ch 2) before a space.
- 1 RS50 sp
- 2 WS50 sp
- 3 RS8 sp1 bl32 sp1 bl8 sp
- 4 WS7 sp3 bl30 sp3 bl7 sp
- 5 RS7 sp3 bl30 sp3 bl7 sp
- 6 WS7 sp3 bl30 sp3 bl7 sp
- 7 RS7 sp3 bl30 sp3 bl7 sp
- 8 WS7 sp3 bl30 sp3 bl7 sp
- 9 RS7 sp3 bl30 sp3 bl7 sp
- 10 WS7 sp3 bl30 sp3 bl7 sp
- 11 RS7 sp3 bl30 sp3 bl7 sp
- 12 WS7 sp3 bl30 sp3 bl7 sp
- 13 RS7 sp3 bl30 sp3 bl7 sp
- 14 WS7 sp3 bl10 sp10 bl10 sp3 bl7 sp
- 15 RS7 sp3 bl9 sp12 bl9 sp3 bl7 sp
- 16 WS7 sp3 bl8 sp14 bl8 sp3 bl7 sp
- 17 RS7 sp3 bl7 sp5 bl6 sp5 bl7 sp3 bl7 sp
- 18 WS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 19 RS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 20 WS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 21 RS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 22 WS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 23 RS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 24 WS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
Show all 50 rows
- 25 RS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 26 WS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 27 RS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 28 WS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 29 RS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 30 WS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 31 RS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 32 WS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 33 RS7 sp3 bl7 sp4 bl8 sp4 bl7 sp3 bl7 sp
- 34 WS7 sp3 bl7 sp5 bl6 sp5 bl7 sp3 bl7 sp
- 35 RS7 sp3 bl8 sp14 bl8 sp3 bl7 sp
- 36 WS7 sp3 bl9 sp12 bl9 sp3 bl7 sp
- 37 RS7 sp3 bl10 sp10 bl10 sp3 bl7 sp
- 38 WS7 sp3 bl30 sp3 bl7 sp
- 39 RS7 sp3 bl30 sp3 bl7 sp
- 40 WS7 sp3 bl30 sp3 bl7 sp
- 41 RS7 sp3 bl30 sp3 bl7 sp
- 42 WS7 sp3 bl30 sp3 bl7 sp
- 43 RS7 sp3 bl30 sp3 bl7 sp
- 44 WS7 sp3 bl30 sp3 bl7 sp
- 45 RS7 sp3 bl30 sp3 bl7 sp
- 46 WS7 sp3 bl30 sp3 bl7 sp
- 47 RS7 sp3 bl30 sp3 bl7 sp
- 48 WS8 sp1 bl32 sp1 bl8 sp
- 49 RS50 sp
- 50 WS50 sp
Work the pattern · row tracker
Row tracker
Row 1 of 50 - 2% done
Row 1 (RS) ← 50 sp
Progress saves on this device and in the link above — bookmark it, or paste it into your Ravelry project notes to pick up exactly where you stopped, on any device.
Pattern code · SLPN v1
A canonical, lossless representation of this pattern. Paste it into any StitchingLab converter to reload, or share it as a single line of text.
SLPN/1/F/50x50/2:1F627B,F8F8F8/B:__________________f____7__j____8f_4_____H_-P____x__j____8f_4_____H_-P____x__j____8f_4_____H_-P____x__j____8f_4_8AP_H_-P-AB_x__j_AAP8f_4_g_B_H_-P4f4fx__j-H-H8f_4_h_h_H_-P4f4fx__j-H-H8f_4_h_h_H_-P4f4fx__j-H-H8f_4_h_h_H_-P4f4fx__j-H-H8f_4_h_h_H_-P4f4fx__j-H-H8f_4_h_h_H_-P4f4fx__j-D8H8f_4_wAD_H_-P-AB_x__j_wA_8f_4_____H_-P____x__j____8f_4_____H_-P____x__j____8f_4_____H_-P____x__j____8f_4_____H__f____7_________________8A/CR-SS-OC:0,BN-SV-WH:1
content_hash · 659a08b4a041…
Related · free crochet patterns
